How to Dry ABS Filament
ABS (Acrylonitrile Butadiene Styrene) absorbs moisture from the air, causing stringing, bubbles, and weak layer adhesion. Drying before printing eliminates these defects. Below are community-verified settings for any filament dryer.
80°C
Set on iDryer, Sunlu S1, Creality4h
Minimum recommended duration<15%
Inside dryer during dryingSigns your ABS filament needs drying
Community Drying Presets (5)
Verified settings shared by the 3D printing community. Compatible with iDryer, Sunlu S1/S2, Creality Filament Dryer, Sovol, and EIBOS.
| Title | Rating | Temperature | Duration | Actions |
|---|---|---|---|---|
ABS - 80°C / 12:00 | 80°C | 720 min | ||
Untitled Drying Preset | null°C | null min | ||
ABS - 80°C / 4:00 | 80°C | 240 min | ||
ABS - 80°C / 4:00 | (1) | 80°C | 240 min | |
ABS - Default Drying | (1) | 80°C | 240 min |
Frequently Asked Questions
What temperature should I set my filament dryer for ABS?
Set your filament dryer to 80°C for ABS. This applies to iDryer, Sunlu S1, Creality Filament Dryer, and similar devices.
How long does ABS need to dry?
Dry ABS for at least 4 hours at 80°C. Heavily absorbed spools may need up to twice as long.
Can I print ABS directly from the dryer?
Yes — printing directly from an active dryer is the best approach for moisture-sensitive filaments. iDryer supports pass-through printing with active drying during your print.